Cargando...

Este producto solo está disponible a través de tiendas minoristas o distribuidores de servicio.

Enlaces rápidos:

Especificaciones, detalles y asistencia Guía de ajuste y referencia cruzada de partes

Las barras de repuesto de la punta de la rueda de cadena de la cosechadora Oregon de paso de 1,9 cm (3/4 in) se adaptan a una amplia gama de equipos cosechadores de madera. Construidas con solidez con una gruesa aleación de acero especializado de 0,95 cm (3/8 in) con ranuras de precisión. Los kits de repuesto de punta están disponibles para maximizar la vida útil de la barra.

Detalles del producto

Material de aleación de acero sólido especializado extremadamente resistente y duradero que minimiza el astillado y la propagación del riel
Las ranuras de precisión son rectas y coinciden con el eslabón motriz de cadena de 1,9 cm (3/4 in) de modo de maximizar el rendimiento
Las colas de la estructura de la barra tienen canto biselado para ayudar a evitar daños al eslabón motriz de cadena
La punta de la rueda de cadena reemplazable rígida y duradera extiende la vida útil de la estructura de la barra.

Especificaciones, detalles y asistencia

Harvester Guide Bars
Product Family	Harvester Bar RSN
Guide Bar Code	SNC
Bar Length	35"
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link.	3/4"
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043”, .050"", .058” and .063"". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.122"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	56.0
Tail Mount	T219