Name: Oregon 21BPX ControlCut Saw Chain for 18 in. Bar - 76 Drive Links - fits Husqvarna
SKU: 21BPX076G

Oregon 21BPX ControlCut Saw Chain for 18 in. Bar - 76 Drive Links - fits Husqvarna

This product is only available through retailers or servicing dealers.

Quick Links:

Specifications, Details & Support Reviews

An Ideal choice for occasional users like property owners and commercial cutters. This .325 pitch .058 gauge chain offers Low-Vibration, Micro Chisel cutters that have small radius working corners for excellent performance and easy maintenance, while also being certified low kickback. Oregon 21BPX076G 18" saw chain Fits Several Husqvarna models

Product Details

The low-vibration, low kickback chain offers outstanding performance. For saw sizes 38-62 cc that run .325 Inch Pitch, .058 Inch (1.5 mm) gauge, 76 drive links
Fits Husqvarna
Designed for occasional chainsaw users including property owners and landscapers
Micro Chisel cutters with small-radius working corners for excellent performance in hardwood and easy maintenance
Built-in Lubri-Tec automatic oiling system extends the life of your chain by delivering oil to key parts of the chain so you can work smarter with less downtime and maintenance
For saw sizes 38-62 cc
This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.

Specifications, Details & Support

Saw Chain
Product Family	ControlCut™
Pitch Pitch Chain Pitch is the size of the chain, and is defined as the distance between any three consecutive rivets divided by two. Oregon chain is made in several pitches - 1/4" is the smallest, 3/8" is the most popular, 3/4” is the largest. Pitch is important because the drive sprocket must be the same pitch as the chain, and if applicable, the bar nose sprocket. The easiest way to determine the pitch of your chain is to look at the number stamped on the drive link..	.325"
Chain Type	21BPX
Gauge Gauge Chain Gauge is the Drive Link's thickness where it fits into the bar groove. The gauge of the chain and the gauge of the bar must match. Oregon has several gauges for chainsaws - such as, .043", .050", .058" and .063". Normal wear can make it difficult to accurately measure chain gauge on a worn chain. Always order by the number stamped on the drive link of your old chain to assure correct gauge.	.058"
Drive Links Drive Links The length of your chain is determined by counting the number of drive links in your chain. Your drive link count has a direct correlation to your bar’s length. Be careful; a bar made by Oregon may take a different drive link count than that of another producer. Here’s a tip: count the number of drive links in the chain you have now, and write that number down someplace where you can find it. Or, if you have an Oregon chain in an Oregon box, the drive link count is stamped on the flap; you can save that flap for future reference.	76.0
Bar Length	20"
Narrow Kerf	No
File Size	3/16"
Package Type	Loop Box

General
Volume	0.34 dm³
Product UOM	Each
Weight (with Packaging)	0.72 Lb
Net Weight Carton	0.0 Lb